Eagle Access Control Systems Eagle-E7 Specifications download pdf (Page 24)

v. No flow control.

• An RS-232 cable with appropriate terminating connectors.

Connection Steps

To connect a terminal to the local console port, perform the following steps:

1. Check that the console connection settings are configured as described above.

2. Connect one of the connectors on the cable directly to the local console port on the E7.

3. Connect the other end of the cable to a console terminal or to the serial connector of a

computer running console emulation software.

Connection Using SSH

An alternative to using the local console port for CLI access is to connect via a physical Ethernet

interface and using a Secure Shell (SSH) client on the management workstation to issue CLI

commands. This is discussed further in Section 4.1, “Management Workstation Connection”.

Chapter 3: E7 Installation

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

No comments

Eagle Access Control Systems Eagle-E7 Specifications Page 24