Eagle ® ICS System – Unicard CR211 User & Installation Instructions Page 6 of 17
Block Programming of Cards
This function is only appropriate if you have numerically
sequential cards.
Enter your password
You will hear a beep every
second
Press # and the address for
the first card
The first code is 101, you will
hear a double bleep
I
Swipe the card or enter 8
digit decimal number
You will hear a double bleep
Enter the total number of
cards in the series (XX)
You will hear a double bleep
Enter a relay function
Relay functions are 1-8, you will
hear a double bleep
Enter a disable function
Disable functions are 0, 1 or 2,
you will hear 2 short and one
long bleep.
The cards are now stored in the
memory and the card reader
returns to programming mode.
Press
*
The card lock returns to
working mode
This will assign all cards in the series the same relay & disable
functions.
Example 1: Program a card in address 101 which controls relay 1
monostable (1) and that should not be time controlled (0).
Enter your Password
Press # 101
I
Swipe the card or enter 8
digit decimal number
You will hear a double bleep
Press #
You will hear a double bleep
Press 1 0
Relay & disable functions
Press *
The card lock returns to
working mode
Comments to this Manuals