Eagle Access Control Systems Eagle-E7 User Manual download pdf (Page 9)

Eagle ® ICS System – Unicard CR211 User & Installation Instructions Page 9 of 17

6. Programming of Group Code

Unicard has one group code. To enter the group code proceed as

follows :-

Enter your Password

Press # 41

You will hear a double bleep

Enter the required four digit

group code

You will hear a double bleep

Enter a relay function

Relay functions are 1-7, you will

hear a double bleep

Press *

The card lock returns to

working mode

The Unicard does not record events for the low security group

code configuration.

If a code is included in the six digit password, e.g. if your

password is 123456, and an 1234 is a door code, the door will

open on 1234 and the card reader will enter programming

mode after 6.

7. Programming of Relay Time

The programme the relay time, proceed as follows :-

The relay time can be configured in either seconds or minutes.

Enter time for relay 1 in seconds (opening time).

Enter your Password

Press # 51 X

X = opening time enter 01 –

Press *

The card lock returns to

working mode

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Eagle Access Control Systems Eagle-E7 User Manual Page 9